CLAMPING HEADS OF THE SERIES SPM-HV
Berg clamping head SPM HV is used for pallet clamping on single or double axis indexing tables.
Clamping heads of the SPM-HV series finds usage in pallet clamping on single or double axis indexing tables. With the clamping heads and attendant tapered rings, you can achieve maximum repeat precision of the clamping position. Due to the mechanical clamping principle with integrated force intensification and locking feature, only one un-clamping line without permanent pressure is necessary. Therefore, Berg clamping head SPM HV is particularly suitable for applications under very tight spatial conditions and for highly dynamic tables. The self-locking gearing ensures protection against the pallet falling, as the retaining forces are much higher than the clamping forces.
The shape and positional accuracy of the clamping cones guarantee maximum repeat precision during a pallet change. The pallets are compatible with the clamping heads of the SPH and SPH-V series. The conical surfaces with a hardness greater than 60 HRC and the special hardness depth are insensitive to any type of soiling. The clamping bolt screw-fitted into the pallet with the tapered ring is drawn into the clamping head by a spring actuated collet. During this process, the spring force is intensified by an integrated gearing.
An integrated hydraulic piston un-clamps the locking device and releases or ejects the clamping bolt. In order to keep the clamping cones clean during the pallet change, blow-out with optimised air guides is provided. These guides are also suitable when using filtered coolant to rinse the clamping heads.
4 clamping heads completely sorted in sets at equal height 0.005 mm and tested
Taper ring, pull stud, clamping force measuring system