ERG CONNECTOR, DRAW-BAR/GRIPPER MEDIUM TRANSFER
Connectors are offered as spindle equipment in a complete unit
Depending on the customer’s requirements one or more media can be transmitted from the end of the spindle (actuation and/or rotary supply) to the front HSK, SSK or Coromant Capto™ interface.
The concentric transmission of the coolant can be separated from the off-centre transmission of the bleeding or control air by using the connector designed as a control slide valve or by closing the air channel by way of non-return valves. The selection and design of the medium transfer to the tool interface should always be considered in conjunction with the rear medium supply.
Ordering example :
Connectors are offered as spindle equipment in a complete unit including draw-bar, spring stack and rear actuation in combination with an attendant ripper.
CLICK HERE TO DOWNLOAD >>>BERG MEDIUM TRANSFER TECHNICAL DATA