|
|
|
|
|
| HYDRAULIC SURFACE GRINDING MACHINE |
|
|
|
|
|
 |
| GMT HYDRAULIC SURFACE GRINDING MACHINE: |
GMT Precision Surface Grinding Machines
are developed for Grinding Components to extremely
close tolerances and to produce surface finishes of the highest standard.
The guideways of the three axis x, y, z are shock resistant and assure excellent
damping.
The guideways are coated with turcite
and scrapped for many years of use.
These features result in machine with low vibrations, high static rigidity
and high load capacity, for highest grinding accuracies. |
 |
|
|
| TABLE (X - AXIS) |
Table is of rigid construction. The table is fully supported on the guideways over the entire grinding length. The table is actuated by a hydraulic cylinder, which is honed. |
| |
| CROSS FEED (Y – AXIS) |
Cross Feed system is possible in three modes:
(a) Manual feed by handwheel on fine setting knob.
(b) Automatic rapid traverse by electronic motor.
(c) Automatic traverse and intermittent feed are infinitely variable upto full wheel width.
Cross feed lead screw is nitrided. The two adjustable nut travels along the trapezoidal screw, which eliminates backlash. |
| |
| VERTICAL FEED (Z - AXIS) |
The wheelhead is guided over vee and flat guideways. The guideways are coated with turcite. The automatic down feed is provided for both plungeand pass grinding. It is possible to give fine and coarse vertical down feed manually through a handwheel.
It is also possible to pre-select the application of down feed reversal of, either the longitudinal or the cross stroke. It is possible to adjust and pre-select the coarse feed and fine feed. |
|
| MODELS : 11-03 / 11-05 / 11-11 / 11-23 |
|
|
|
